Warm Tech FED2000 Traduction Des Instructions D'origine page 19

Light Bulb Replacement
♦
Unplug from mains supply.
♦
Remove the screws and take down the back plate. (1)
♦
Remove the flame reflector follow the arrow. (2)
♦
Remove the screws and turn down the firewall plate. (3)
♦
Turn the Bulb in an anticlockwise direction. (4)
♦
To reassemble, follow the above instructions in reverse
Clearance and Maintenance
♦
Before cleaning always remove the plug from the electrical socket.
♦
Ensure that the unit is cool enough to work on.
♦
To remove the dust, wipe the appliance with a cloth
♦
Never use abrasives powder or solvents.
♦
When cleaning ensures that the heater is in upright position.
order.