Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
7.
Unpack the unit carefully.
8.
Plug into any suitable mainly outlet.
9.
First press the power switch
switch for different function :
Fan Heater 1000W ON or OFF
Fan Heater 2000W ON or OFF (Can not operate without first pressing 1000W)
Oscillation ON or OFF
Overheating Safety
This unit has been provided with an overheating safety that turns "OFF" the unit if there is a technical
malfunction or if it is used wrongly. If this happens, you must:
Switch off the heater and pull out the plug.
Remove the cause or correct the malfunction.
After short cooling down period, the overheating safety switch on
automatically and the heater can be used again.
Note：You must always take care that there is sufficient distance for safety (at least 50cm) between the
heater and the wall or the other objects. The airflow must not be impeded by anything.
to start the flame effect and the fan. Then could choose below
Publicité
Table des Matières
