Warm Tech FED2000 Traduction Des Instructions D'origine page 15

Make sure that the air inlet and outlet openings are not blocked. To avoid any risk of fire, do not cover
IMPORTANT
During the first few minutes of initial use, you may notice a slight odour and some smoke.
This is normal and will quickly disappear,
It is the coating applied to the heating elements to prevent rusting during transit.
Before Plugging the unit into the mains, ensure by visual inspection that the unit is intact
and has not suffered any damage during transit.
Each unit is manufactured to ensure safety and reliability. Please read the instructions
carefully and keep them for future reference.
GB FIREPLACE HEATER
220-240V AC 50Hz 1000-2000W
the heater (ex. With clothes)
Warning / Danger!
Read manual before
use.
In accordance with
essential applicable
safety standards of
European directives