Liebert HIROSS Microface E Manuel D'utilisation page 74

Power Supply, PTC Sensors for units with 2 Compressors & FC = Glyc
Microface 2
24 0 PE
Microface 1 Power Supply
24VAC , +/- 10%
NOTES : The Glycol sensor is Standard in FC units only, but can also be connected to DF Units.
Instead of the Sensors for Outdoor and Glycol also switching contacts may be used. The
relevant Delta-T Parameter must be set to "CON" in that case.
Digital Outputs for units with 2 Compressors & FC = Glyc
Microface 1 2
G
3point FC Actuator 1
NOTES :
74
FRANCAIS
alternative
PTC 5
C 5
Outdoor Sensor
DIG Out
3 4
3point FC Actuator 2
Manuel d'utilisation Microface E & Hiromatic G/E rév.12.06.2002
alternative
PTC 5 PTC 4
C 5
C
changeover
Contact
Glycol Temp. Sensor
DIG Out
5 6
PTC 4
4 C 4
changeover
Contact
DIG Out 2
2 G
Output ON
if Unit is in FC / DF Mode
74