Residual Risks - Ryobi ROS310 Traduction Des Instructions Originales

Safety, performance, and dependability have been given
top priority in the design of your random orbital sander.
INTENDED USE
The random orbital sander is intended for sanding and
fi nishing metal, wood, plastic, or similar materials using
the abrasive pads provided. The random orbital sander is
intended to be used by adult operators who have read the
instruction manual and understand the risks and hazards.
The random orbital sander should only be used in well
ventilated areas. The random orbital sander is designed for
dry sanding only.
The random orbital sander is intended for consumer use
and should only be used as described above and not for
any other purpose.
WARNING
Dust from certain paints, coatings, and other materials
may cause irritation or allergic reactions. Dust from
wood, such as oak, beech, MDF, and similar materials
can be carcinogenic. Only qualifi ed specialists should
be allowed to use the product on materials containing
asbestos.
WARNING
Do not use compressed air to remove dust from the
product. Dirt and grit blown away by compressed air can
cause serious eye injury.
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
SANDER SAFETY WARNINGS
■ Always wear safety goggles and a dust mask when
sanding, especially when sanding overhead.
■ A suitable breathing respirator must be worn while
sanding lead paint, some woods, and metal to avoid
breathing the harmful/toxic dust or air.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise and the operator
should pay special attention to avoid the following:
■ injury caused by dust
NOTE: Using the product will produce considerable
amount of dust and fine particles. Use the dust
collection device or connect a dust extraction vacuum
when operating the product. Wear dust masks
containing filters appropriate to the materials being
worked on. Ensure adequate workplace ventilation. Do
not eat, drink, or smoke in the work area.
■ injury caused by noise and vibration
NOTE: Wear ear protection during the sanding
operation. Do not operate the product for long periods
of time. See "Risk reduction".
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fi ngers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
■ Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
KNOW YOUR PRODUCT
See page 81.
1. Power cord sleeve
2. Speed control dial
3. Live tool indicator
4. On/off switch
5. Sander cover
6. Dustbox cover
7. Dustbox container
8. Sanding paper
MAINTENANCE
WARNING
The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product will prevent
accidental starting that could cause serious injury.
WARNING
When servicing, use only original Ryobi replacement
parts. Use of any other parts may create a hazard or
cause product damage.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
English | 1