User Instructions; Behaviour Upon The Failure And Resetting Of The Power Supply; Maintenance; Parameter Setting - Gewiss Chorus GW 16 972CB Manuel D'installation

Thermostat ice wi-fi - à encastrer

Masquer les pouces Voir aussi pour Chorus GW 16 972CB:

Manuel de programmation (124 pages)

Table des Matières

Les langues disponibles

Behaviour upon the failure and resetting of the power supply

If there is a power failure, the device will not implement any action. When the power supply is

restored, the thermostat will reactivate the conditions that were in place beforehand.

The thermostat is equipped with an energy accumulation system to maintain the time in

the event of a power failure (max 1h).

Following the drop and subsequent resetting of the power supply, the contact of the

integrated relay remains open.

The device does not require any maintenance. Use a dry cloth if cleaning is required.

CLEANING FUNCTION

This function makes it possible to temporarily inhibit the display so the glass plate can

be cleaned without making any unintentional modifications. The function can be

enabled/disabled as follows.

Enabling:

• touch the upper sector of the circular slider and the Mode button key at the same time

for at least 3 seconds.

• wait for a short beep (if the acoustic signal for glass cleaning is enabled) or the

contemporary flashing of the touch button keys (for the luminous signal that glass

cleaning has been enabled).

• wait for the count down to appear on the display (30 sec.) during which it is possible

to clean the plate.

Disabling:

• wait for the count down to reach zero.

Detailed information about the settings of the Wi-Fi thermostat parameters, the network

configuration and the setting of the user account for using the APP can be found in the

relative Programming Manual (www.gewiss.com).