User Instructions; Selecting Heating/Air Conditioning; Setting Parameters - Gewiss Chorus GW 10 791 Manuel D'installation Et D'emploi

Press the key to switch the function modes from heating to air-conditioning and
vice-versa.
To set the timer-thermostat parameters:
1. use the key to select the function type (heating/air conditioning);
2. Press the key once.
The word SET and the clock appears on the screen, and the day of the week cursor starts
to flash.
According to the function type, it is now possible to sequentially modify:

USER INSTRUCTIONS

Selecting heating/air conditioning

Heating
The symbol indicates the heating mode.
Air conditioning
The symbol indicates the air-conditioning mode.

Setting parameters

46