User Instructions; Selecting Heating/Air Conditioning; Setting Parameters - Gewiss Chorus GW 10 761 Manuel D'installation Et D'emploi

Press the key to switch the function modes from heating to air-conditioning and
vice-versa.
To set the timer-thermostat parameters:
1. use the to select the function type (heating/air conditioning);
2. press the key once
The word SET and the clock appears on the screen, and the day of the week cursor starts
to flash.

USER INSTRUCTIONS

Selecting heating/air conditioning

Heating
The symbol indicates the heating mode.
Air conditioning
The symbol indicates the air-conditioning mode.

Setting parameters

44