Check List - INFOSEC UPS SYSTEM Zen Live 500 Manuel Utilisateur

It is recommended that a qualified technician change the battery of Zen Live 500/650 UPS.
Replacement of Zen Live 800/1000 UPS batteries can be performed by the user using the
following procedure:

TURN the UPS over and Remove the screws located on
the bottom of the UPS to open the battery cover.
 LIFT the battery out of the compartment and
disconnect the two wires connecting it to the UPS.
Replace the same type of batteries.
(Red wire: positive terminal)
(Black wire: negative terminal)

Slide the battery compartment cover back to the battery
housing.
9 . T R O U B L E S H O O T I N G
Should the UPS fail to function correctly we recommend you perform the following tests
before calling the Hot Line.

Check list:

 Is the main switch in the "ON" position?
 Is the UPS plugged into the mains power supply?
 Does the power supply fall within specified UPS values?
 Is the input breaker open (Off position)?
 Is the UPS overloaded?
 Is the battery flat or defective?
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
20
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 02 19 AA 59 203 27