tbs electronics powersine 200-12 Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Wash your hands when done.
3. If battery acid contacts skin or clothing, wash immediately with soap and water. If
acid enters eye, immediately flood eye with running cold water for at least 15
minutes and get medical attention immediately.
4. Be careful when using metal tools in vicinity of batteries. Dropping a metal tool onto
a battery might cause a shorted battery and an explosion.
5. Remove personal metal items such as rings, bracelets, necklaces, and watches
when working with a battery. A battery can produce a short-circuit current high
enough to weld a ring or the like to metal, causing severe burns.
THE RED WIRE MUST BE CONNECTED TO THE POSITIVE (+)
TERMINAL AND THE BLACK WIRE TO THE NEGATIVE (-)
TERMINAL OF THE BATTERY.
Reverse polarity connection of the battery wires can damage the
inverter! Damage caused by reversed polarity is not covered by the
warranty. Make sure the powerswitch is in the OFF '0' position before
CAUTION
connecting the battery.
Powersine dc to ac sinewave inverters
Powersine dc to ac sinewave inverters
Powersine dc to ac sinewave inverters
Powersine dc to ac sinewave inverters
- 7 -

Publicité

Table des Matières
loading

Table des Matières