Warranty / Limits Of Responsibility - tbs electronics powersine 200-12 Mode D'emploi

Too high ambient temperature
Note : Don't turn off the inverter when it's operating in an 'Inverter temperature too high.
Cooling down' error. The inverter needs this error time to cool down.
PROBLEM : Inverter jumps between continuous mode and ASB mode all the time
Possible cause :
Connected load is not compensated or the
ratio between inrush current and continuous
current is too large.
If none of the above remedies will help solving the problem you encounter, it's best to
contact your local TBS distributor for further help and/or possible repair of your inverter.
Do not open the inverter yourself, there are dangerous high voltages present inside.
Opening the inverter will directly void your warranty.

4. WARRANTY / LIMITS OF RESPONSIBILITY

TBS Electronics (TBS) warrants this inverter to be free from defects in workmanship or
materials for 24 months from the date of purchase. During this period TBS will repair the
defective inverter free of charge. TBS is not responsible for any costs of the transport of
this inverter.
This warranty is void if the inverter has suffered any physical damage or alteration, either
internally or externally, and does not cover damage arising from improper use
attempting to operate the inverter with excessive power consumption requirements, or
from use in an unsuitable environment.
This warranty will not apply where the product has been misused, neglected, improperly
installed or repaired by anyone other than TBS. TBS is not responsible for any loss,
damage or costs arising from improper use, use in an unsuitable environment, improper
installing of the inverter and inverter malfunctioning.
Since TBS cannot control the use and installation (according to local regulations) of their
products, the customer is always responsible for the actual use of these products. TBS
products are not designed for use as cricital components in life support devices or
systems, that can potentially harm humans and/or the environment. The customer is
always responsible when implementing TBS products in these kind of applications. TBS
does not accept any responsibility for any violation of patents or other rights of third
parties, resulting from the use of the TBS product. TBS keeps the right to change product
specifications without previous notice.
1)
Examples of improper use are :
- Too high input voltage applied
- Reverse connection of battery polarity
- Mechanical stressed enclosure or internals due to harsh handling and/or incorrect
packaging
Powersine dc to ac sinewave inverters Powersine dc to ac sinewave inverters
Powersine dc to ac sinewave inverters Powersine dc to ac sinewave inverters
Move the inverter to a cooler place or
provide additional cooling by an external
fan
Remedy :
Connect an additional load to the output.
- 12 -
1)
,