tbs electronics powersine 200-12 Mode D'emploi page 17

Output waveform
Permissible cos ϕ of load
Input voltage (± 3% tolerance) :
Maximum efficiency
No load power consumption at
nominal input voltage
[ASB]
Operating temperature range
(ambient)
ASB threshold
Protections against
Indications (by pre-programmed
flashing sequences of the power
LED)
DC input connection
AC output connection
Enclosure body size (l x h x w)
Protection class
Total weight
The inverter complies with the
following standards :
Note : the given specifications are subject to change without notice
1)
Measured with resistive load. Power ratings are subject to a tolerance of ± 4% and are
decreasing as temperature rises with a rate of approx. 1.2%/° C starting from 25° C.
2)
Undervoltage limit is dynamic. This limit decreases with increasing load to compensate
the voltage drop across cables and connections.
Nominal 12Vdc
Range 10.5
< 4.8W
[0.4W]
Pout = 15W
Short circuit, overload, high temperature and low
Power on, short circuit/overload, high temperature,
228 x 113 x 163mm (without mounting brackets)
6.2 kg
See page 16
- 15 -
Powersine dc to ac sinewave inverters Powersine dc to ac sinewave inverters
Powersine dc to ac sinewave inverters Powersine dc to ac sinewave inverters
True sinewave (THD < 5%
0.2 – 1 (up to Pnom)
24Vdc
2) 2)
– 16Vdc 21 – 31Vdc
92% 93%
< 6.5W
[0.7W]
-20°C to +50 °C
Pout = 15W
battery voltage
high/low battery voltage and ASB mode
Two wires, length 1.5 meters, ∅ 10mm²
IEC-320 AC outlet
IP20
6.2 kg
1)
@ Pnom)
48Vdc
2)
41 – 60Vdc
94%
< 8.2W
[0.5W]
Pout = 15W
6.2 kg