Cefiontect Cleaning Instructions - Toto CST775 Manuel D'installation

MAINTENANCE INSTRUCTIONS
1) Shut off the water supply.
2) Flush the toilet to remove the water inside the tank.
3) Remove the tank lid and place somewhere safe.
NOTE: Before removing anything from the tank, note
the placement of the ush valve, chain and refill tube.
4) Unhook the refill tube from the overflow tube of the
ush valve.
5) Unhook the chain from the trip lever.
6) Uninstall the tank (refer to the toilet installation
manual).
7) Remove the ush valve body from the tank.
8) Replace the ush valve in the same position as the
former ush valve.
9) Hand tighten the mounting nut of the ush valve and
use a wrench to tighten another 3/4 turn.
10) Reinstall the tank onto the bowl and place the chain
and refill tube the same way as it was for the former
ush valve.
11) Turn the water supply back.
12) Check for any leakage after the tank has been filled.
CEFIONTECT
WHAT IS
CEFIONTECT®?
CEFIONTECT® is TOTO's super-smooth permanent glaze that prevents
debris from sticking to surfaces. Products with the letter "G" in the
number have the CEFIONTECT® glaze. This glaze, along with regular
cleaning, will help keep your TOTO product in pristine condition.
NOTE:
For best results to keep your Toto product with CEFIONTECT® clean:
• Lavatory: Use a mild dish detergent with a clean, soft cloth.
• Toilet: Use a gel based cleaner with a soft bristled-plastic brush.
• Don't use cleaners, polishing powders or detergents that have gritty or
coarse particles.
• Don't use bleach, chemical thinners or products that have acid or
alkaline detergents listed as ingredients.
• Don't use metal scrub brushes or steel wool.
Following these instructions will ensure that your TOTO product with the
CEFIONTECT® glaze will always stay intact, keeping your product like new
for years to come!
Replacing the Flush Valve
CLEANING INSTRUCTIONS
®
7
ill. 1
Refill Tube
Chain
Flush Valve
Overflow Tube
ill. 2
No CEFIONTECT®
With CEFIONTECT®