Hama MyVoice2000 Mode D'emploi page 6

Warning
Do not use the headset while it is charging.
• If the battery is fully charged, the status LED (3) will go out.
• Disconnect all cable and mains connections after use.
Note
If you have not used the item for a few month, it may take 15-30
minutes for the status LED (3) to red when charging.
5. Operation
Switching the headset on/off
• Turn On:
With the device off, press and hold the multifunction button (1)
for 4 seconds until you hear a voice say "Power on". The status
LED (3) lights up in blue for about 1 second.
• Turn Off:
With the device on, press and hold the multifunction button (1)
for 4 seconds until you hear a voice say "Power off". The status
LED (3) will light up in red briefly before the device turns off.
The first time the device is turned on, pairing is automatically started
– see 5.1 Bluetooth pairing.
5