Delivery Content; Technical Speci Cation; Information On Wall Mounting - Reer 1901.06 Notice D'utilisation

DO NOT COVER
Screws
• Mains voltage: 230 V
• Power: 600 W
• Type of assembly: power plug in socket
or xed connection
• Protection class:: 1
• The radiant heater is only allowed to be assembled at a permanent place on the wall and in horizontal
position. It is not allowed to be attached to the ceiling.
• The minimum distances to walls, ceilings and oors as shown in Fig. A must be obeyed..
• Keep a minimum distance of 65 cm to in ammable materials such as textiles, wood etc. Danger of
re exists!
• The radiant heater is not allowed to be xed underneath a socket.
Changing table heater
• Irradiating angle: 90°
• Infrared radiation and temperature distribution
proofed according to the standard for medical
products (IEC601-2-21)

Information on wall mounting

- 9 -

Delivery content

AUS
Operating instructions

Technical speci cation

GB