Angled Bracket And Flat Bracket - Conrad Electronic SY-DB-400 Notice D'emploi

d) Angled bracket and flat bracket
Cable slots
1. Use the holes in the angled bracket as a template for where to
drill. Drill holes and insert the dowels using a mallet if needed.
2. Fix the angled bracket to the wall using the wall screws.
3. Attach the flat bracket to the angle bracket, facing
UP as indicated by the symbol.
4. Use a plus head screwdriver to attach the adaptor leads to
the connectors (7).
5. Fasten the camera to the bracket using the star screw.
The doorbell chime
has a built in
converter, so the
polarity does not
matter.
UP
43