Flat Bracket - Conrad Electronic SY-DB-400 Notice D'emploi

c) Flat bracket
Cable slots
1. Use the holes in the flat bracket as a template for where to
drill. Drill holes and insert the dowels using a mallet if needed.
2. Fix the bracket to the wall using the wall screws,
facing UP as indicated by the symbol.
3. Use a plus head screwdriver to attach the adaptor leads to
the connectors (7).
4. Guide the wires through the cable slots.
5. Fasten the camera to the bracket using the star screw.
42
The doorbell chime
has a built in
converter, so the
polarity does not
matter.
UP