Pioneer X-SMC1-k Mode D'emploi page 34

Système av compact
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

13
Additional information
Problem
Folder or file names are not
displayed in alphabetical
order.
Much time is required to
recognize the USB storage
device.
Power is not supplied to the
USB storage device.
When connected to an HDMI-compatible
device
Problem
Picture is not displayed.
Sound is not produced or is
distorted.
Multichannel audio signals
are not output.
Colors are not properly
displayed on TV screen.
When an iPod/iPhone is connected
Problem
Can't operate the iPod/
iPhone by the remote control.
Can't operate the iPod/
iPhone.
34
En
Check
This is not a problem with this unit.
What is the USB storage devices
capacity?
Is Err displayed on the front panel
display? No power is supplied if the
power consumption is too high.
Check
Is the resolution properly set?
Is the HDMI cable properly
connected?
Is HDMI Out properly set?
Is HDMI Out properly set?
Is HDMI Color properly set?
Remedy
The order of the folder and file names displayed on the Disc
Navigator depends on the order in which the folders or files were
recorded on the USB storage device.
Some time may be required to load the data when large capacity
USB storage devices are connected (this could take several
minutes).
Turn the power off then back on.
Turn the power off, then disconnect and reconnect the USB storage
device.
Press FUNCTION / to switch to the other mode, then switch
again to the USB mode. (When the input is switched back to USB,
'
' is displayed on the front panel display.)
Remedy
Set HDMI Resolution properly for the connected device (page 26).
Restore HDMI Resolution to the default setting (720x480p)
(page 26).
Connect the cable securely (all the way in).
With some cables, 1080p video signals will not be output.
Set HDMI Out to LPCM (2CH) or Auto (page 26).
Set HDMI Out to Auto (page 26).
Change the HDMI Color setting (page 26).
Remedy
Make sure the iPod/iPhone is connected correctly (refer to
Connecting your iPod/iPhone on page 14).
Make sure the iPod/iPhone is connected correctly (refer to
Connecting your iPod/iPhone on page 14).
If the iPod/iPhone is experiencing a hangup, try resetting the iPod/
iPhone, and reconnect it to the unit.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

X-smc1-s

Table des Matières