Accessories; Stem Deflector; Preparing The Base Tool For Use With Stem Deflector; Extension - Avdel Genesis nG3 Manuel D'instructions

A c c e s s o r i e s
S t e m D e f l e c t o r
The stem deflector is a very simple alternative to the standard stem collector and allows access in restricted areas. To replace the
stem collector with the stem deflector proceed as follows:
Preparing the Base Tool for use with Stem Deflector
The airline must be diconnected before any servicing or dismantling.
•
Remove stem collector bottle
assembly 71213-05100 or
71210-20400.
ADAPTOR
71213-20103
71223 Tool
•
Fit Stem Deflector (07340-00342) into Adaptor (71213-
20103).
•
Screw Adaptor onto End Cap Assembly 71213-05103.
•
Rotate the stem deflector until the aperture faces away from
the operator and any other person(s) in the vicinity.
•
Turn off air supply to the vacuum system by adjusting Rotary
Valve 38.
E x t e n s i o n
Fitted between the tool and the nose assembly the extension
allows access into deep channels.
•
To fit the extension, remove any nose assembly components.
•
Screw the inner extension to Jaw Spreader Housing 41.
•
Screw the outer onto Head Assembly 58.
•
Fit the nose assembly onto the extension.
S w i v e l H e a d s
Instead of a nose assembly, a swivel head can be fitted to a base tool. It allows 360° rotation of the tool about the nose tip and allows
access into many applications otherwise too restrictive. There are two types of swivel heads: the straight swivel head with the nose tip
slightly offset from the centre line of the tool head and the right-angle swivel head with the nose tip on a perpendicular axis to the head
of the tool. See drawings below for dimensions and pages 15-16 for detail.
Item numbers in bold refer to the general assembly drawing and parts list on pages 24 and 25.
STEM DEFLECTOR
07340-00342
ADAPTOR NUT
71210-20101
71224 Tool
•
Fit Stem Deflector (07340-00342) into Adaptor (71210-
20101).
•
Screw Adaptor onto End Cap Assembly 71403-02102.
•
Rotate the stem deflector until the aperture faces away from
the operator and any other person(s) in the vicinity.
•
Turn off air supply to the vacuum system by adjusting Rotary
Valve 38.
INNER

EXTENSION 71210-20300

71213-20103
or
71210-20101
ADAPTOR
07340-00342
STEM DEFLECTOR
STEM DEFLECTOR
07340-00342
OUTER
13