Hayward SharkVAC XL Pilot Guide De L'utilisateur page 31

6. Return the filter bucket assembly into the cleaner using the diagram shown to determine the front and
back.
7. Close the dome and press the lid button to snap dome into place.
NOTE: Filter cleaning solution can be used to remove excessive dirt and/or sand.
Remember: The cleaner your filter is, the more cleaning will be effective.
Periodic Cleaning of Moving Parts
⚠ WARNING: Disconnect the power supply from electrical outlet before cleaning moving parts.
• Inspect the venturi to ensure that no debris or hair has clogged the impeller.
• The impeller can be cleaned by spraying it with a garden hose.
• Spray water using a garden hose around the float box assembly to remove any sand or debris to
ensure free movement when changing float position.
• Remove any debris that has accumulated between the tracks and wheels.
Storage
When unit is out of the water, store the cleaner in a dry, shady location at temperatures between
4°C-46°C
Cable Care
With continued use, the cable may become coiled (like a telephone cord). To correct this, periodically
stretching the cord out in the sun should remove any cord twists.
IMPORTANT: The cable should be checked periodically for any external damage.
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Page 11 of 19
Use of non genuine Hayward manufactured parts will void all warranty.
SharkVAC XL™ Pilot / e.VAC PRO²™ Robotic cleaner Rev. B