Consumer Information And Safety; Warning - Caution - Hayward SharkVAC XL Pilot Guide De L'utilisateur

⚠ DANGER
⚠ WARNING
⚠ CAUTION
Operating the Cleaner
⚠ WARNING
⚠ CAUTION
⚠ WARNING
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Page 3 of 19

CONSUMER INFORMATION AND SAFETY

Risk of electrical shock or electrocution
The electrical supply to this product must be installed in accordance with all applicable
local codes (see p17) and ordinances. Improper installation will create an electrical hazard
which could result in death or serious injury to pool users or others due to electrical
shock, and may also cause damage to property.
Do not play with cleaner or cable or apply to body. Can trap or tear hair or body parts.
Cable can trip or entangle swimmers which could result in drowning.
Before installing the cleaner, understand cleaner coverage. The cleaner was not designed
to automatically clean steps or to work under a solar cover. It was also not designed to do
initial cleanup for a new pool installation.
A 30 mA differential protection device must be installed to protect your electrical outlet and
to prevent any possible electric shock. Failure to do so could create an electrical hazard
which could result in death or serious injury to pool users or others due to electrical shock
and may also cause damage to property.
DO NOT switch the pool cleaner to "ON" if it is not immersed in the water. Operating the
cleaner out of the water may cause severe damage and will result in loss of warranty.
Always remember to turn off the power supply "OFF" and unplug it from the power outlet
before removing the cleaner from the pool.
It is mandatory to allow a safety distance between the power supply and the pool as
required by the current installation standard (3.5 m minimum).
Use of non genuine Hayward manufactured parts will void all warranty.
SharkVAC XL™ Pilot / e.VAC PRO²™ Robotic cleaner Rev. B