Hayward SharkVAC XL Pilot Guide De L'utilisateur page 29

MAINTENANCE
Clean the filter cartridge after each use:
1. Open the cleaner by pressing the lid button and lifting up the dome cover.
2. Remove the filter bucket assembly by lifting it up out of the cleaner with both hands from each side.
3. Flip the bucket assembly over to remove the debris and then rinse with a garden hose to remove
small particles.
4. Filter cartridges do not need to be removed to clean.
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
Page 9 of 19 SharkVAC XL™ Pilot / e.VAC PRO²™ Robotic cleaner Rev. B