Identification; Product Mark And Model Designation; Name And Address Of The Manufacturer; Product Description - Weka 100.2224. 10 Notice De Montage, D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

In the event of doubt, reference should be made to DIN 18202 'Level tolerances in building
construction', tab. 3, row 3, with a maximum height difference at the furthest points of approx. 10 to
11 mm.
All preparatory work must have been carried out in accordance with the technical regulations
before assembly begins. The substrates/floors/foundations constructed or selected by you must be
suitable for the assembly.

3. Identification

3.1. Product mark and model designation

Solid wood summerhouse in Nordic spruce with 28 mm wall thicknesses
General
All wood parts in Nordic spruce
Wall assembly
28 mm thick tongue and groove logs
Roof
19mm thick roof boards nailed to study roof purlins

3.2. Name and address of the manufacturer

Manufacturer: weka Holzbau GmbH
Johannestr. 16
D-17034 Neubrandenburg
Tel. : (0049)-395 429080
Fax : (0049)-395 4290883
E-mail

4. Product description

4.1. General functions and area of application

The cabins are intended exclusively for the storage of garden equipment etc. or as a place to relax
for a short while and enjoy your garden. You are not permitted to use the cabin as a residence or
heated accommodation.

4.2. Dimensions

You can find the dimensions on the views included in the pack.

4.3. Safety information

Selection of the substrate
The ground under the cabin should be level, horizontal and built up. If your cabin is located near
slopes and basements, you should consult a local builder. Otherwise, there may be a risk of
collapse.
Built-up ground must be compressed to ensure that the cabin does not sink, otherwise damage
may occur. Any turf must also be removed.
Space requirements
The space required depends on the size of your cabin. The cabin must always be accessible from
the outside on all sides to allow for inspection, ventilation and protection against weathering. The
space required should be approximately 1.0 – 1.5 m larger than your cabin on all sides.
Techn. Änderungen vorbehalten!
info@weka-Holzbau.com
© Copyright HRB 3662
11

Publicité

Table des Matières
loading

Table des Matières