General; Assembly Conditions; Identification; Product Mark And Model Designation - Weka 412.3830.00.00 Notice De Montage, D'utilisation Et D'entretien

warranty when
- the weka product does not have the correct base (foundation or otherwise), even if the errors are minor,
- has deviated from the respective assembly instructions,
- wind speeds in excess of force 7, natural catastrophes or other violent events occur
- the specified load limits (e.g. snow load etc.) have been exceeded,
- any changes (additions or rebuilding) have been made to the product as compared with the assembly instructions,
- the wood has received insufficient or no care (maintenance: wood protection agent, wood stain etc.).
A causal association with the damage is not generally required. Colour changes typical of wood, cracking, warping, shrinkage, swelling or similar normal changes deemed to be natural characteristics of wood, and their consequences, are expressly
excluded from the warranty. Further claims and consequential damage are not generally covered by the warranty conditions. Components made from materials other than wood are covered only by the statutory warranty provisions and other
statutes; they are not covered by the warranty.
prior to installation
Damaged or defective parts must be rejected
2.3. Assembly conditions for a weka assembly team
If you wish for help assembling your cabin and choose to employ a weka assembly team, weka Holzbau GmbH will carry out the following services for you:
Assembly means putting together (installation) of the individual parts supplied. It does not include treating them with a wood protection agent, the delivery and assembly of accessories and accessory parts. Electrical connections are not included in
the assembly service.
The items to be assembled must be located at the installation site/location/base area. Transport of the article or the individual parts over a distance greater than 5 m or to another level is not included in the assembly price quoted. The substrate must
be stable, horizontal and level.
In the event of doubt, reference should be made to DIN 18202 'Level tolerances in building construction', tab. 3, row 3, with a maximum height difference at the furthest points of approx. 10 to 11 mm.
All preparatory work must have been carried out in accordance with the technical regulations before assembly begins. The substrates/floors/foundations constructed or selected by you must be suitable for the assembly.

3. Identification

3.1. Product mark and model designation

Log cabins in Nordic spruce with 45 mm wall thicknesses

General

All wood parts in Nordic spruce
Floor
Substructure of pressure-treated floor beams
19 mm thick tongue and groove floorboards
Wall assembly
45 mm thick tongue and groove logs
Versatile design possible due to subsequent installation of windows and doors
Door
8 mm single-pane safety glass
Window
8 mm single-pane safety glass
Roof
19 mm thick roof boards nailed to study roof purlins

3.2. Name and address of the manufacturer

Manufacturer: weka Holzbau GmbH
Johannestr. 16
D-17034 Neubrandenburg
Tel. : (0049)-395 429080
Fax : (0049)-395 4290883
E-mail info@weka-Holzbau.com
or the warranty claim will otherwise be void.
Techn. Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.
© Copyright HRB 3662
8