Ce Certification And Warranty - Zehnder ComfoFond-L Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
5
CE Certifi cation and warranty
Guarantee conditions
The ComfoFond-L is covered by a manufac-
turer's warranty for a period of 24 months after
fitting up to a maximum of 30 months after the
date of manufacture. Warranty claims may only
be submitted for material faults and/or construc-
tion faults arising during the warranty period. In
the case of a warranty claim, the ComfoFond-L
must not be dismantled without written permis-
sion from the manufacturer. Spare parts are only
covered by guarantee, if they were supplied by
the manufacturer and have been installed by an
approved installer.
The warranty becomes invalid if:
The guarantee period has elapsed;
The unit is used without fi lters;
Parts are used that were not supplied by the
manufacturer;
Unauthorized alterations and/or modifi cations
have been made to the unit.
EC declaration of conformity
Zehnder Group Nederland B.V.
Lingenstraat 2
NL - 8028 PM Zwolle
Tel.: +31 (0)38-4296911
Fax: +31 (0)38-4225694
Company register Zwolle 05022293
Machine description:
Complies with directives:
Zwolle, 02.12.10
Zehnder Group Nederland B.V.
E. van Heuveln,
Managing Director
EC declaration of conformity
Ground-source heat exchanger:
Machinery Directive
Low Voltage Directive
EMC Directive
Pressure Equipment Directive
Liability
The ComfoFond-L has been designed and
manufactured for use in balanced ventilation
systems incorporating Zehnder heat recovery
systems. Any other application is seen as inap-
propriate use and can result in damage to the
ComfoFond-L or personal injury, for which the
manufacturer cannot be held liable.
The manufacturer is not liable for any damage
originating from:
Non-compliance with the safety, operating and
maintenance instructions in this manual;
The use of components not supplied or recom-
mended by the manufacturer (the responsibility
for the use of such components lies entirely
with the fi tter);
Normal wear and tear.
End of useful life
Consult with the supplier about what should be
done with the ComfoFond-L at the end of its
useful life. If the ComfoFond-L cannot be
returned to the supplier, avoid disposing of it
with the domestic waste, and ask your local
council about the options for recycling the
components or processing the materials in an
environmentally friendly manner.
ComfoFond-L
(2006/42/EEC)
(2006/95/EEC)
(2004/108/EEC)
(97/23/EEC))
3 - EN

Publicité

Table des Matières
loading

Table des Matières