Residual Hazards - Lenze ERBP R W Série Instructions De Montage

Residual hazards

{
Danger!
Dangerous electrical voltage
The terminals of the brake resistor may carry dangerous voltages during
operation of the basic device and up to three minutes after mains
disconnection.
Possible consequences:
Death or severe injuries when touching the terminals.
ƒ
Protective measures:
Before working on the brake resistor disconnect the basic device from the
ƒ
mains.
Check all power terminals for safe isolation from supply.
ƒ
Select the mounting location so that the operating conditions mentioned
ƒ
in the technical data are always ensured.
}
Danger!
Hot surface during operation
During operation, the brake resistor becomes very hot. (For temperatures, see
Technical data.)
Possible consequences:
Severe burns when touching the brake resistor.
ƒ
Fire or smouldering fire if flammable materials or substances are placed
ƒ
near the brake resistor or may get to it.
Protective measures:
Before working on the brake resistor, check its surface temperature.
ƒ
Select the mounting location so that the operating conditions mentioned
ƒ
in the technical data are always ensured.
Protect the mounting location by suitable fire prevention and protection
ƒ
against contact.
EDKRBP082R DE/EN/FR/ES/IT 8.0
Safety instructions
l
Residual hazards
2
35