Application As Directed - Lenze ERBP R W Série Instructions De Montage

Application as directed

Brake resistors
ƒ must only be actuated under the operating conditions specified in these operating
instructions.
ƒ are components
– for mounting in a machine.
– for assembly with other components to a machine.
Commissioning of the brake resistor is prohibited until it has been determined that the
machine into which the brake resistor is to be mounted complies with the regulations
of the EC Machinery Directive.
ƒ are electrical equipment for mounting in control cabinets or similar closed electrical
operating areas.
ƒ comply with the protective requirements of the "Low voltage" EC Directive.
ƒ are not machines as defined by the Machines EC Directive.
ƒ are not household appliances, but are only designed as components for subsequent
commercial use.
Drive systems with brake resistors
ƒ The responsibility for compliance with the EC Directives in the machine application is
that of the re−user.
Any other use shall be deemed inappropriate!
EDKRBP082R DE/EN/FR/ES/IT 8.0
Product description
l
Application as directed
3
39