Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
objects such as nails, coins, etc.
(3) Do not expose battery cartridge
to water or rain.
A battery short can cause a large
current
possible burns and even a
breakdown.
6.
Do not store the tool and battery
cartridge in locations where the
temperature may reach or exceed
50 ﾟ C (122 ﾟ F).
7.
Do
not
incinerate
cartridge even if it is severely
damaged or is completely worn out.
The battery cartridge can explode in
a fire.
8.
Be careful not to drop or strike
battery.
9.
Do not use dropped or struck
battery.
SAVE THESE
INSTRUCTIONS.
Tips for maintaining maximum
battery life
1.
Charge the battery cartridge before
completely discharged.
Always stop tool operation and
charge the battery cartridge when
you notice less tool power.
2.
Never recharge a fully charged
battery cartridge.
Overcharging shortens the battery
service life.
3.
Charge the battery cartridge with
room temperature at 10 ﾟ C - 40 ﾟ C
(50 ﾟ F - 104 ﾟ F). Let a hot battery
cartridge
charging it.
flow,
overheating,
the
cool
down
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is switched
•
off and the battery cartridge is removed
before adjusting or checking function on
the tool.
battery
Take care not to trap finger(s) between
•
cleaner and battery as shown in
diagram when loading battery.Trapping
finger(s) may cause injury.
010055
Installing or removing battery
cartridge
2
010054
Always switch off the tool before
•
insertion or removal of the battery
cartridge.
To
•
before
withdraw it from the tool while sliding
the button on the front of the cartridge.
To insert the battery cartridge, align the
•
tongue on the battery cartridge with the
groove in the housing and slip it into
place. Always insert it all the way until it
locks in place with a little click. If you
can see the red part on the upper side
4
1
3
remove
the
battery
1. Red part
2. Battery cartridge
3. Button
cartridge,
Publicité
Table des Matières
