Neriox 140977 Mode D'emploi page 3

3
140977
DIGITAL PROTRACTOR
Operating instructions
5
6
7
Legend:
1. Main body
2. Measuring arm
3. Lock nut
4. LCD display
5. ON/OFF key – activation/deactivation
6. ZERO key – resetting display to zero
7. HOLD/Rev key – fix indicated value in place or rotate through 180°
8. Battery compartment
Safety-relevant information
• Use protractor at permissible operating temperature only
• Protect protractor (specifically the display unit) against liquids
and moisture
• Protect protractor against mechanical damage
• Properly dispose of protractor
Repair
If the instrument is defective, please contact our
service centre → Servicecenter@brw.ch
Brütsch/Rüegger Werkzeuge AG, Heinrich Stutz-Strasse 20, Postfach, CH-8902 Urdorf, Tel. +41 44 736 63 63, Fax +41 44 736 63 00, www.neriox.tools, sales@brw.ch
4
2
Specification
Measurement range: 180°
Reading: 0.05°
Graduated arc diameters: Ø 120 mm / Ø 150 mm / Ø 200 mm
Length of measuring arms: 150 mm / 200 mm / 300 mm
Operating temperature: 0...40°
Energy: Lithium battery CR2032 / 3.0 V
Properties
LCD display
Power ON/OFF
Resetting to zero in any position
HOLD/Rev key – fix indicated value in place (briefly press once)
HOLD/Rev key – rotate indicated value through 180° (press and hold once)
Main body / Measuring arm of stainless steel
Operation:
Activation/Deactivation
Resetting of display to zero
Fix indicated value in place
Rotate indicated value through 180° – press and hold HOLD/Rev. key
Instructions for care:
Cleaning agents and cleaning cloths can be used for cleaning the surfaces.
Do not use petrol, acetone or isopropanol under any circumstances.
Remove the battery if the instrument is not going to be used for an extended period.
1
8
3
– briefly press ON/OFF key
– briefly press ZERO key
– briefly press HOLD/Rev. key