Honeywell EnviteC AlcoQuant 6020 Notice D'utilisation page 21

1 General Safety and Service Notes
Handling the device requires exact knowledge of these operating instructions and their
observance. The device is intended for the application described only.
•
Do not operate in explosion hazardous areas!
The device is not licensed for operation in explosion hazardous areas.
•
Fire risk
Do not use in conjunction with easily inflammable gases (e.g. anesthetic gases)..
•
Portable or mobile high-frequency communication devices may impair the functions of
electrical medical devices.
•
The device must not be connected to a PC by means of the data cable while in use on the
patient.
Commissioning
Prior to commissioning, check the calibration stickers on the device housing. If the date shown
on the plate has been reached or exceeded, the AlcoQuant 6020 must be recalibrated and/or
sent for servicing and should not be used for measuring. Maintenance and calibration must be
carried out by qualified and authorised personnel only
Maintenance
Calibration and maintenance must be performed by authorised experts at six-monthly intervals
(concluding in a report).
Maintenance work must be carried out on the device by authorised service personnel only.
Only original parts from EnviteC-Wismar GmbH may be used for repairs.
Six-monthly calibration of the device is necessary to guarantee the specified measuring
accuracy (see specifications) over the entire period.
Safety warnings
Designates risks for man and/or machine. Non-compliance will create risks to
man and/or machine. The level of risk is indicated by the word of warning.
Important information on a topic or a procedure and other important information!
Disposal
In accordance with Directive 2002/96/EG (WEEE), after being dismantled,
electrical and electronic equipment is taken back by the manufacturer for proper
disposal!
Dok.-Nr.: 059-07-11000300-k.doc / 07.08
AlcoQuant 6020
21