Efco DS 3000 D Manuel D'utilisation Et D'entretien page 19

Unité motrice
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
TRANSLATION OF ORIGINAL INSTRUCTIONS
To our valued customers
Thank you for selecting an Emak product.
Our network of dealers and authorized
workshops will always be at your complete
disposal for any need you may have.
INTRODUCTION
For correct use of the machine and to avoid
accidents, do not start working until you have
read this manual carefully. You will find
explanations concerning the operation of the
various parts plus instructions for necessary
checks and relative maintenance.
NOTE: The descriptions and illustrations
contained in this manual are not binding. The
m a n u f a c t u r e r r e s e r v e s t h e r i g h t t o
undertake any modifications it deems
necessary without revising this manual.
In addition to the operating instructions, this
manual contains paragraphs that require your
special attention. Such paragraphs are marked
with the symbols described below:
WARNING: where there is a risk of an accident
or personal, even fatal, injury or serious damage
to property.
CAUTION: where there is a risk of damaging the
machine or its individual components.
WARNING
RISK OF HEARING DAMAGE
IN NORMAL CONDITIONS OF USE, THIS
MACHINE MAY EXPOSE THE OPERATOR TO A
PERSONAL DAILY NOISE LEVEL EQUAL TO OR
HIGHER THAN
85 dB (A)
CONTENTS
1. SAFETY PRECAUTIONS (precautions
for using the machine safety)
2. SYMBOLS AND SAFETY WARNINGS
(explanations on how to identify the
machine and the meaning of the
symbols)
3. MAIN COMPONENTS (position of the
main parts that make up the machine)
4. ASSEMBLY (explanations on how to
remove the packaging and assemble
detached parts)
5. STARTING
6. STOPPING THE ENGINE
7. M A I N T E N A N C E ( a l l i n fo r m a t i o n
required to keep the machine at peak
efficiency)
8. STORAGE
9. ENVIRONMENTAL PROTECTION
(advice on using the machine in ways
that respect the environment)
10. TECHNICAL DATA (a summary of the
main specifications of the machine)
11. DECLARATION OF CONFORMITY
12. WARRANTY CERTIFICATE (a summary
of the warranty conditions)
13. TROUBLESHOOTING (helps you to
quickly solve any problems you may en-
counter while using the machine)
WARNING! – In order to use the "BC 300
D - DS 3000 D" engine unit described in this
manual it must be coupled exclusively to one of
the following accessories: Brushcutter "D-BC",
Pruner "D-PP", Blower "D-BV, Hedgetrimmer
"D-HC" and extension. In any case, read this
manual and the manuals supplied with each
accessory carefully before using the complete
machines.
1. SAFETY PRECAUTIONS
WARNING
- The safety instructions given in this
manual refer exclusively to operation of
the power unit. The instructions do not
take account of the danger deriving from
use of the machine of which the power unit
is a component part.
- The ignition system of your machine
produces an electromagnetic field of very
15
low intensity. This field could interfere
with certain pacemakers. To reduce the
risk of serious or fatal injury, persons with
pacemakers should consult their doctor or
17
the manufacturer of the pacemaker
before using this machine.
17
WARNING: National regulations may
limit the use of the machine.
17
18
20
GB
21
23
23
24
25
25
26
15

Publicité

Table des Matières
loading

Table des Matières