Hazet 6391 Mode D'emploi page 20

4. Storage
• Keep tool in a dry and dust-free place.
• Do not expose the tool to liquids or aggressive
• Do not store the tool outdoors.
• Keep tool out of reach of unauthorized persons.
• Storage temperature: -10°C to +40°C
• Relative air humidity: max. 60%
Before each use, check HAZET tools for full
functional efficiency. Do not use the tool if its func-
tional efficiency cannot be ensured or if damage is
detected. If the tool is used, when it is not in full
working order, you risk severe injuries to persons
and damage to property. Defective tools may cause
severe injury.
In order to avoid injury or damage, it is essential
that the following fundamental safety guidelines will
be observed:
• Always account for tools being used.
• Observe prescribed tightening torque values
• Repair work must be carried out exclu sively
• Only use the tool within the prescribed plac-
• Stand safely!
• For safety reasons any modification of HAZET
20
BA 6300 6spr VIII.indd 20 BA 6300 6spr VIII.indd 20
GB
For Your Safety
The tool has be stored according
the following conditions:
substances.
5. Dangers Emanating from
the Tool
(follow manufacturer's instructions).
by authorized persons.
es, and governed under the current regulations
relating to the working environment.
tools is strictly forbidden. Any modification of
this tool will result in immediate exclusion from
warranty and liability.
USA
1
1
6
1
6
6
1
6
6
1
6
6
2
•
08.03.12 16:37 08.03.12 16:37