Sony NSR-500 Série Manuel D'installation page 39

1
1 Select [Master] under [Central
Server Mode].
2 Select the network interface for
connection in [Network Interface
for Remote Client Connection]
under [Connect from Remote
Client].
2
Create a user in the master server.
Click (add) in the User
Configuration screen, and create a
user.
2
Step 4: Verifying
Operation
After basic configurations are finished,
make sure that camera images are displayed
in the "Main" screen and verify other such
operations.
1
3
1 Change the layout and display images
from registered cameras.
Drag and drop a camera from the
Cameras pane to a monitor frame to
display images from that camera.
2 Click a monitor frame to activate it (light
blue frame), and control pan, tilt, and
zoom from the [Control] tab of the
Camera Control pane.
3 Capture a moving object with the
camera, and confirm that an alarm
occurs.
When alarm recording has been
configured through basic configuration,
a red frame surrounds the monitor
frame, and a record of each alarm is
displayed in the Alarm History at the
bottom of the screen.
4 Click [PLAYBACK] to play back
recordings.
When you click [PLAYBACK], images
from a previously configured time will
be played back (quick playback).
When you enter a date and time and
Step 4: Verifying Operation
4
2
5
39