Sony NSR-500 Série Manuel D'installation page 28

Verify configurations, and click [Next].
Click [Finish] when the restart confirmation
message appears.
The unit restarts.
The logon screen appears.
Continue to the following section,
"Logging On."
28 Step 3: Settings
r
r
r
r
Note
If you want to reconfigure the settings after
configuring them with the Setup Wizard,
you can reconfigure them from the login
screen.
To access the Setup Menu
from the logon screen
Click [Administration Menu].
1
r
Click [Setup Menu].
2
Installing Licenses
You can install a license on the NSR to
enable registration of additional cameras.
You can register up to 16 cameras under
factory default conditions, but this can be
increased to up to 24 cameras.