Large Wand Accessories; Selection And Mounting Of The Cleaning Pads And Tips - Walter SURFOX 304 Manuel De L'utilisateur

7

Large wand accessories

Large Wand Accessories
A) Selection and mounting
of the cleaning pads and tips
Tungsten tips are made from high quality tungsten alloy
material. Other materials will not resist the harsh environ-
ment created by the electrochemical process.
WARNING! When the insert is too worn, it can
cause damage to the cleaning pads.
In this example of a worn insert, there are only two
contact points. All the current comes out of these
two points. Because of the lower available cross
section, the temperature will be higher at the two
points and the cleaning pads may become dam-
aged or wear out prematurely.
Inserts
Tungsten insert 90°
No: 48-R 133
Use with cleaning pads 54-B 026
or 54-B 040 and clamp ring
54-B 002 or boot 54-B 005
Narrow tungsten insert 90°
No: 54-B 017
Use with cleaning pad 54-B 028
or 54-B 041 and clamp ring
54-B 020 or boot 54-B 007.
Large graphite insert for
SURFOX 204 and 304
Order No.: 54-B 009
45 mm W - Ideal for surface
renewing or restoring, and to
clean the back of MIG welds
Carbon fiber brush for large
wand on SURFOX 304
Order No.: 54-B 095
Without adaptor - Pack of 5
Triangular sleeve for large
wand carbon fiber brush
Order No.: 54-B 101
10
TIP! Resurface the insert using a bench grinding wheel
Note: Be sure to install the O-Ring located at the back of
the insert whenever they are changed.
O-Ring
Tungsten insert 60°
No: 54-B 016
Use with cleaning pad 54-B 027
and clamp ring 54-B 002 or boot
54-B 006
Narrow tungsten insert 60°
No: 54-B 018
Use with cleaning pad 54-B 028
and clamp ring 54-B 020 or boot
54-B 008.
Large pads for large
graphite insert
Order No.: 54-B 043
90 mm L X 50 mm W X 2 mm H
Pack of 10 with O-ring
Spare brush adaptor for large
wand on SURFOX 304
Order No.: 54-B 099
Cylindrical sleeve for large
wand carbon fiber brush
Order No.: 54-B 102
or angle grinder.
Tungsten insert kit for
SURFOX 104, 204 and 304
Order No.: 54-B 012
Includes:
1 x 48-R 133
1 X 54-B 017
1 X 54-B 016
1 X 54-B 018
Large pad for graphite
insert for SURFOX 304
Order No.: 54-B 052
Pack of 5
Wand holder for
SURFOX 304 and 204
Order No.: 54-B 094