Switching On And Setting The Thermometer; Setting The Basic Functions - mebby NO TOUCH Mode D'emploi

5. Switching on and setting the thermometer

Briefly press the On/Off button
After a brief self-test and two short beeps the thermometer is ready for forehead measurement.
The device always starts up in forehead temperature mode

5.1 Setting the basic functions

This menu allows you to set the following functions individually, one after another.
Time
Date
format
• With the thermometer switched on, press and hold
the LIGHT/SET button for 5 seconds.
The time format option flashes on the display (fig. 1).
• Use the MODE/MEM button to set your preferred
time format and confirm with the LIGHT/SET button.
The year flashes in the display (fig. 2).
• Use the MODE/MEM button to set the year and con-
firm with the LIGHT/SET button.
Day/month flashes in the display (fig. 3).
• Use the MODE/MEM button to set the day and
month, and confirm with the LIGHT/SET button.
In the 24h format, the date is displayed as day/month. In the 12h for-
mat, it is displayed as month/day.
100022_MEBBY NO TOUCH USER MANUAL_REV.00_21.04.2016.indd 47
.
.
Temperature
Time
meas. unit
Acoustic Illuminated
signal
display
Fig. 1
Fig. 2 Fig. 3
14/06/2016 11:32:58
47