Training And Removing The Wireless Key Switch For The Alarm Centre; Training And Removing The Alarm Centre For The Wireless Key Switch - ABUS Security-Center FU5165 Instructions D'installation

8.3.1 Training and removing the wireless key switch for the
alarm centre
1. In Installer mode, select "Other devices
Add/Del Arming station" and then select a wireless operating panel.
Send the training signal from the wireless key switch to the wireless
alarm system by repeatedly pressing a tamper switch.
2. When the training signal is received by the wireless alarm system,
it emits a double tone and the
selected wireless operating panel.
3. Exit this menu item.
Important:
To remove the wireless key switch, select in installer mode "Other devices
Arming station
wireless operating panel and delete it by following the instructions on the
display.
8.3.2. Training and removing the alarm centre for the wireless
key switch
1. Switch your wireless key switch to learn mode.
2. Press the program button (15) three times. The display shows
Keep the button pressed until the
3. After you release the button, a
4. Learning mode is now active. You can now train a new secvest.
868 within the next 4 min.
5. In installer mode, select "Other devices
Info Module". Send the training signal from the wireless alarm
system to the wireless key switch.
6. When the training signal is received by the wireless key switch, it
emits a double tone.
7. Confirm successful learning procedure on the wireless alarm
system.
Add/Del Arming station." Select the corresponding
26
Arming station
symbol appears behind the
appears on the display.
appears briefly on the display.
Info Module
.
Teach