Preface; Usage In Accordance With Regulations - ABUS Security-Center FU5165 Instructions D'installation

0. Preface

Dear Customer,
Thank you for purchasing this surface-fitted wireless key switch for your
secvest 868 wireless alarm system. This product was designed and built
using state-of-the-art technology, which complies with the current
standards of domestic and European regulations. The CE has been proven
and all related certifications are available from the manufacturer upon
request (www.security-center.org). See the end of these instructions for the
CE conformity declaration. To maintain this status and to guarantee safe
operation, it is your obligation to observe these instructions.
They contain important installation and operation information. Store these
instructions in a safe place for future reference. These instructions are an
important product accessory. Bear this in mind if you pass the product on to
others.
Everything possible has been done to ensure that the contents of these
instructions are correct. However, neither the author nor Security-Center
GmbH & Co. KG can be held liable for loss or damages caused directly or
indirectly by these instructions, whether real or alleged. We reserve the
right to make changes to these instructions without prior notice.
© Security-Center GmbH & Co. KG, September 2007

1. Usage in accordance with regulations

This wireless key switch is used for the simple activation and deactivation
of your secvest 868 wireless alarm system.
Furthermore, an output of your secvest. 868 wireless alarm system can be
controlled using the wireless key switch. You can use it, for example, to
open and close garage doors or window blinds.
This key switch is assigned to a specified user of your secvest. 868 by a
programmed user code. The authority of this user determines which
partition can be switched.
Main areas of use are entrance doors, garage doors, and access areas of
all types.
18