Pump Description - Agilent Technologies TwisTorr 84 FS Notice De Mode D'emploi
Masquer les pouces
Voir aussi pour TwisTorr 84 FS:
- Mode d'emploi (192 pages) ,
- Mode d'emploi (297 pages)
Publicité
17
Technical Information
Description of the TwisTorr 84 FS
Pump Description
The TwisTorr 84 pump consists of a high frequency motor driving a
turbine fitted with 9 bladed stages and 3 TwisTorr drag stages. The
turbine rotates in an anticlockwise direction when viewed from the
high vacuum flange end.
The turbine is made of high-strength aluminium alloy, machined from
a single block. The TwisTorr stages are in the form of four disks.
The turbine rotor is supported by permanently lubricated high
precision ceramic ball bearings installed on the forevacuum side of
the pump.
The static blades of the stator are made of stainless steel. These are
supported and accurately positioned by spacer rings.
TwisTorr 84 FS User Manual / 87-901-043-01(B)
281/336
Publicité
Chapitres
