Maintenance And Care - EUFAB 13496 Manuel De L'opérateur

OPERATING INSTRUCTIONS
On/Off/selection of the operating mode
Pressing the switch rotates through the various modes in the following order:
Workshop lamp (at 100%)
Charging with the 230 V charger:
1. Connect the charging cable to the cordless workshop lamp (charging socket on the rear of the lamp).
2. Connect the charging cable to the charger.
3. Plug the charger into a 230 V socket.
During the charging process, the indicator lamp illuminates red; if the workshop lamp is fully charged, the indicator lamp turns green.
Separate the devices in reverse order after charging.
Charging on a 12 V vehicle outlet:
1. Connect the charging cable to the cordless workshop lamp (charging socket on the rear of the lamp).
2. Connect the charging cable to the vehicle charging adapter.
3. Connect the vehicle charging adapter to a 12/24 V vehicle socket.
During the charging process, the indicator lamp illuminates red; if the workshop lamp is fully charged, the indicator lamp turns green.
Separate the devices in reverse order after charging.
In doing so, ensure that the battery of your vehicle is not completely discharged.
Fixture:
The cordless workshop lamp is equipped with a folding hook in order to enable you to work with your hands free. The lamp has a magnetic foot
and a magnetic bracket on the rear as additional fixture option.
Do not push or pull the magnetic base over sensitive surfaces that can be damaged as a result.

MAINTENANCE AND CARE

Cleaning
Clean the cordless workshop lamp using a slightly moist, soft cloth and a mild cleaning agent. Ensure that no cleaning agents or liquids enter
the device. Do not use aggressive cleaning agents, solvents, petrol, etc.
Storage
Store the cordless workshop lamp in a dry place. Do not expose the lamp to moisture, oil, dust, dirt, high temperatures, strong vibrations, or
mechanical load.
Charge the cordless workshop lamp fully before you store the cordless workshop lamp for a longer period of non-use.
NOTES REGARDING ENVIRONMENTAL PROTECTION
Please dispose of this device via the recycling bin or the public/municipal collection points.
The materials can be recycled. You make an important contribution to protecting our environment by recycling, material utilisati-
on or other forms of reusing waste equipment!
CONTACT
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
6
Workshop lamp (at 50%)
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
Torch OFF
info@eal-vertrieb.com
www.eal-vertrieb.com