Husqvarna FS 700 EX Manuel D'utilisation page 61

Operator's Manual FS 700EX
Introduction
The FS series is a new series of electrically powered floor
saws from Husqvarna. The aim during development has
been to create a powerful, yet easy to handle machine for
cutting reinforced concrete, brick and other stone material.
The machine should also be easy to use for one person.
The FS series features electrical trolley feed and blade
feed. These are both controlled by a lever fitted on the
adjustable handle.
The handle can be folded down into the saw and the
cutting bridge can easily be removed to facilitate transport.
This means it is easier to lift the saw, and it takes up less
space.
A saw is supplied with a flange and blade guard. A flush
cutting blade flange and a flush cutting blade guard are
available as accessories.
In order to use this machine as effectively as possible, it is
important that as the user you read through this Manual
carefully. In the event of uncertainty concerning any
details these should be discussed with your dealer before
you start to use the machine.
English - 61