How To Cook Rice - Tiger JBV-S10U Mode D'emploi

5
Place the inner pot in the rice
cooker.
(1) Turn the inner pot slightly left and right so
it is positioned correctly without any tilt.
(2) Close the lid.
(2) Close lid.
(1) Set pot inside
rice cooker.
Note
● Make sure the inner pot is set securely into the
rice cooker.
● Be careful not to touch an operation key when
closing the lid.
16 16
6
Connect the power plug to an
outlet.
Power plug
The power will turn on and the
blink.
Inner
pot
Blinks
Note
● If the Keep Warm lamp is on, press the
[KeepWarm/Cancel] key to turn off the lamp.
On Off
4

How to Cook Rice

1
Press the [Menu] key to select
the desired menu.
Each time the [Menu] key is pressed, the
selected menu will change in the order shown
below.
The symbol will blink while the menu is
being selected.
Blinks
symbol will
• It is not necessary to press the [Menu] key if
the desired menu is already selected.
2
If you selected the "Porridge"
menu, use the [Hour] and [Min]
keys to set the desired cooking
time.
• Each time the [Hour] key is pressed, the
set time will increase by 5 minutes. Each
time the [Min] key is pressed, that time will
decrease by 5 minutes.
• The cooking time can be set to any 5-minute
increment between 40 and 90 minutes.
Increases by
5 min.
• The default setting is for 60 minutes. Adjust
as desired.
3
Press the [Start] key.
The Start lamp will turn on.
If you selected the "Quick" menu, a one-short,
one-long beep alarm will sound. Otherwise,
only a one-beep alarm will sound.
On
Cooking will start.
Decreases by
5 min.
On
17 17