Listening To The Radio; Using The Line In Or Aux Input; Line In Jack; Aux In Auxiliary Input Rca - THOMSON DS301 Mode D'emploi

Listening to radio
1. Press the SOURCE button on the unit or the remote control to select RADIO mode. The unit will be in FM radio
mode.
2. Select the desired radio station by pressing the PREVIOUS/NEXT button.
3. Press and hold PREVIOUS/NEXT button for 2 seconds, The unit will automatically start and search the frequencies
for the previous or next strong station and stop on that station.
4. Once you find a station you want to save, press the MEM button on the remote control, "P01" will be shown on the
display, press M up or M dn until the desired memory position number appears on the display. Press the MEM
again to confirm and save the current station.

Using the Line in or AUX Input

Analogue sound signals from other sources can input to the speaker. To select the Aux function button on the tower or
repeatedly press the source button on the remote control until the displace shows AUX or LIN.

Line in Jack

Requires a 3.5mm cable
1. Connect a 3.5mm cable to the Aux in 1 jack. Connect the other end of the 3.5mm cable to an Mp3 player or other
audio source.
2. Press the power button to turn the unit on.
3. Press the function button or source button on the remote to switch to Line In mode.
4. Use the controls on the connected device to begin playing audio routed through the unit.

AUX In Auxiliary Input RCA

Requires an RCA cable
1. Connect an RCA cable to the Auxiliary Input. Connect the other end of the RCA cable to the audio output on your
DVD player, stereo system, gaming system or television.
2. Press the power button to turn the unit on.
3. Press the function button or the SOURCE button on the remote control to switch to Aux In 2 mode.
4. Use the controls on the connected device to begin playing audio routed through the unit.
Using the USB/SD Input
1. Plug your USB flash drive/Secure Digital Memory Card to the USB/SD converter, then connect the converter to the
unit.
2. Press function once into the USB mode, the unit can play automatically.
3. Press function twice into the SD mode, the unit can play automatically.
4. Press PREVIOUS/NEXT to select track.

USB charging

There is a USB charger on the top of the unit to charge small devices such as smartphones that can be charged via USB.
Output power: 5V/2.1A max

Bluetooth Mode

A. Pairing with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth enabled. Specific pairing steps may vary with different cell phones.
Please refer to the user manual of your cell phone for further information. The general pairing steps are as follows:
1. Keep DS301 and Bluetooth cell phone within 1 meter when pairing.
2. Press Standby button, and press the function once into the Bluetooth mode
3. Switch on your cell phone's Bluetooth function and search for Bluetooth devices. After the search is completed, select
"DS301" from the Bluetooth device list.
4. According to indication, enter password or PIN No: "0000" and press "Yes" or "confirm".
5. After successful pairing, select "DS301" from the Bluetooth device list and press "connect".
B. Pairing with a Bluetooth stereo transmitter
Different Bluetooth transmitters have different pairing ways. Please refer to the user manual of your Bluetooth
transmitter for further information. The general pairing steps are as follows:
1. Keep DS301 and Bluetooth transmitter within 1 meter when pairing.
2. Press Standby button, and press the function once into the Bluetooth mode
3. Switch on your Bluetooth transmitter and let it enter pairing mode.
4. The transmitter will search and connect with DS301 automatically. After successful connecting, the Bluetooth voice
will change when connected successfully.
GB 5