Before The First Use; Using The Mixing Bowl - Tristar MX-4170 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15

Before the firSt uSe

Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V  50/60Hz)
Place the device on a flat stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
Never use the mixer for longer than 10 minutes continuously, after this
allow the mixer to cool down for 15 minutes.
Special safety instructions for this machine
Only operate this machine under supervision.
Do not interfere with any safety switches.
Do not insert anything into the rotating hooks while the machine is
working.
Place the machine on a smooth, flat and stable working surface.
Do not insert the mains plug of the machine into the power socket
without having installed all the necessary accessories.
uSe

using the mixing bowl

In order to lift the arm, push the lift button. The arm will now move
upwards.
Remove the mixing bowl by turning it anticlockwise.
Mount the required utensil by inserting the top into the output shaft
and lock it by turning the utensil anticlockwise.
Now fill the mixing bowl with your ingredients.
note: do not overfill the machine - the maximum quantity of
ingredients is 1.2 kg.
Place the mixing bowl on the device and turn the bowl clockwise until
it locks into place.
Lower the arm by using the lift button and press the arm down.
Insert the mains plug into a properly installed safety power socket.
Switch on the machine using the speed controller to a speed between
1 and 6 (corresponding to the mixture and accessory which is used).
For pulse operation (kneading at short intervals), turn the switch to the
"PULSE" position. The switch has to be held in this position according
to the desired interval length. When the switch is released it returns
automatically to the "0" position.
adjusting the levels and using the hook for not more than 1.2 kg of
mixture.
Levels
Use of accessory
Type of Mixture
Heavy mixtures(e.g. bread or
1-4
Doughhook
short pastry)
Medium-heavy mixtures(e.g.
3-4
Beater
crepes or sponge mixture)
Light mixtures (e.g. cream,
5-6
Whisk
eggwhite, blancmange)
Interval (e.g. for mixing
Pulse
Whisk
undersponge, egg white)
note: Short operation time: With heavy mixtures, do not operate the
machine for more than ten minutes, and then allow it to cool down for
a further ten minutes.
After kneading/stirring turn the speed knob back to the "0" position as
soon as the mixture has formed a ball. Then remove the mains plug.
Multi mixer with bowl
EN
5

Publicité

Table des Matières
loading

Table des Matières