VEVOR 9924S3 Mode D'emploi page 10

MAINTENANCE AND TROUBLE SHOOTING
(1) Before use, please make sure that the Boat Ladder is installed firmly.
(2) When assembling ladders, do not tighten all the screws first; Lock them
completely after the installation.
(3) When checking the ladder, if some parts are slightly deformed, it can be
corrected with a mallet or other tools.
(4) Do not overload the ladder when it is used.
(5) If the ladder wobbles, stop using it, check whether it is loose, and
tighten it again.
(6) After each use, remove sand and dirt from the Boat Ladder and rinse it
off with water.
(7) If the ladder is not used for a long time, you are advised to disassemble
and store it.
(8) If some parts of the ladder are seriously damaged. Stop using the
ladder and replace them.
- 9 -