Technical Data - Nakayama PS2700 Traduction De La Notice Originale

WARNING! Do not over-tighten the spark
plug to avoid any damage!
BEVEL GEAR
The bevel gear is filled with grease. Ask an
authorised service centre or similar qualified
person to check the quantity regularly and fill up
using proper grease if necessary.
CARBURETTOR
The carburettor is pre-set by the manufacturer.
Should it be necessary to make any changes
please contact an authorised service centre or a
similarly qualified person. Do not attempt to
make any adjustments by yourself.

TECHNICAL DATA

GENERAL
Engine type
Engine displacement
Max. engine power , in kW
Max. engine speed
Engine idle speed
Clutch engagement speed
Fuel tank volume
Fuel type
Engine oil type
Mixture ratio petrol : oil
Spark plug gap
Net weight (without cutting attachment and with
empty tanks) approx.
PRUNER
Chain oil tank
Saw chain speed
Max. cutting length
Guide bar length
Chain pitch
Chain gauge (thickness of drive links)
Drive sprocket (teeth and pitch)
SL34, air cooled 2-stroke
0.75 kW
10500/min
3000 /min
4430 /min
400 ml
unleaded
2-cycle motor oil
0.6 – 0.7 mm
6.0 kg
150 ml
28 m/s
230 mm
9.525 mm (3/8")
1.27 mm (0.050")
7 teeth x 9.525 mm(3/8")
Noise values
Sound pressure level L
Uncertainty
Sound power level L
Uncertainty
Guaranteed sound power level L
Vibration a
Uncertainty
The declared vibration value has been measured
in accordance with a standard test method
and may be used for comparing one tool with
another.
The declared vibration value may also be used in
a preliminary assessment of exposure.
WARNING! The vibration emission value
during actual use of the tool can differ
from the declared value depending on the
ways in which the tool is used. Identify safety
measures to protect the operator that are based
on an estimation of exposure in the actual
conditions of
use (taking account of all parts of the operating
26cc
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time).
The sound intensity level for the operator may
exceed 85dB(A) and ear protection measures
are necessary.
REPAIR
33 : 1
This product does not contain any parts that can
be repaired by the consumer. Contact a qualified
specialist to have it checked and repaired.
TRANSPORTATION
1. Switch the product off and disconnect the
spark plug connector before transporting it
10"
anywhere.
2. Attach transportation guards for cutting means
of hedge trimmer, brush cutter and pruner.
3. Always carry the product by its handles.
4. Protect the product from any heavy impact or
strong vibrations which may occur during
transportation in vehicles.
pA,av
WA,av
:
hv
80.4 dB(A)
3 dB(A)
110.4 dB(A)
1.86 dB(A)
112 dB(A)
WA
2
10.220m/s
1.5 m/s²
23