Cleaning The Oven; Accessories; Replacing The Oven Light Bulb - Inventum VFG6034WGZWA Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CLEANING THE OVEN

The oven should be cleaned after every use. When cleaning the oven the lighting should be switched on to enable you to see
the surfaces better. The oven chamber should only be washed with warm water and a small amount of washing-up liquid.
The wire shelf supports can easily be removed for easier cleaning of the oven.
1. To remove them, pull the front catch.
2. Tilt the shelf support and remove from the rear catch.
3. To install the wire shelf support, first place it in the rear catch.
4. Now place the front of the shelf support in the front catch.
1
2
4
3
The oven can also be cleand with steam:
• Place a bowl with 250 ml (1 glass) of water on a baking tray on the first level from the bottom in the oven.
• Close the oven door.
• Set the temperature knob to 50°C and the oven function knob on the setting
.
• Heat the oven chamber for approximately 30 minutes.
• Open the oven door, wipe the chamber inside with a cloth or sponge and wash the oven chamber using warm water with
washing-up liquid.
• After cleaning the oven chamber wipe it dry.
• Never use aggressive cleaning products or sharp objects to clean the oven door.

ACCESSORIES

Clean the accessories, such as the baking tray and the grid with warm water and a mild detergent. Dry thoroughly before
reusing.

REPLACING THE OVEN LIGHT BULB

In order to avoid the possibility of an electric shock ensure that the appliance is switched off and unplugged
before replacing the bulb.
• Unscrew and wash the lamp cover and then wipe it.
• Replace the light bulb with a new equal bulb (25 W, 230V, E14 connection and must be resistant to high
temperatures - upto 300°C).
• Refit the lamp cover.
• Plug the appliance in.
40
English

Publicité

Table des Matières
loading

Table des Matières