Use Of The Oven - Inventum VFG6034WGZWA Mode D'emploi

5

use of the oven

Important! In cookers equipped with the electronic timer, the time [0.00] will start flashing in the display field upon
connection to the power supply. Set the timer with the current time. If the current time is not set, operation of the oven is
impossible.
ELECTRONIC TIMER
OK - button to select mode of operation
> - plus button [ + ]
< - minus button [ - ]
- appliance on indicator
- minute minder indicator
- duration indicator
- end time indicator
SETTING THE CURRENT TIME
After connection to the mains or reconnection after a power cut the display shows flash 0.00.
• Press the [ OK ] key to set the current time for the first time. The display will show the symbol
• Press and hold the keys [ < ] / [ > ] within 7 seconds to set the current time.
• To store the new time setting, wait approximately 7 seconds after the time has been set. The dot below the
stop flashing.
• To adjust the time later, press the keys [ < ] and [ > ] simultaneously and adjust the current time while the dot below the
symbol is flashing.
• To store the new time setting, wait approximately 7 seconds after the time has been set. The dot below the
stop flashing. The current time is adjusted.
Note: The oven can be turned on when you see the
MINUTE MINDER
The minute minder can be activated at any time, regardless of the status of other functions. The minute minder can be set
from 1 minute up to 23 hours and 59 minutes.
• Press the [ OK ] key. The
• Set the minute minder using the keys [ < ] and [ > ]. The display shows the set time and
the symbol indicates the minute minder is activated.
As soon as the set time has passed an alarm signal will sound and the
• Press and hold any key to mute the alarm. The
the current time after approximately 7 seconds.
Note! If no key is touched, the alarm will turn off automatically after approximately 7 minutes.
SEMI - AUTOMATIC OPERATION
Use this function if the oven is to be switched off after a specific duration.
• Set the oven function knob and the temperature knob to the setting at which you want the
oven to operate.
• Press the [ OK ] key until the display shows dur and the
• Set the required preparation time using the keys [ < ] or [ > ]. The preparation time can be set
from 1 minute to 10 hours.
• The set time will be saved in the memory after about 7 seconds. The display will show the
current time and the
• Once the preparation time has elapsed the oven will turn off automatically. You will hear an
alarm and the symbols
• Press and hold any key to mute the alarm. The symbols
after approximately 7 seconds.
• Turn the knobs for the oven function and the temperature to the off setting [ 0 /  ].
symbol flashes on the display.
symbol.
and will be flashing.
OK
symbol on the display.
symbol flashes.
symbol will be off and the display will show
symbol flashes.
and will be off and the display will show the current time
.
symbol will
symbol will
OK
OK
OK
33
English •