Caframo BDC1850 Mode D'emploi page 16

Caframo Accessories
Impeller Features
Pivoting Blade Impeller
• pinned to shaft
• stainless steel 316L
• weighs 126 grams
• moderate shear with moderate vortexing
characteristics
• will vortex 5 gallons of water at 800 rpm
Collapsible Blade Impeller
• pinned to shaft
• stainless steel 316L
• weighs 127 grams
• high shear radial flow for mixing in carboys
or narrow neck flasks
• collapsed blades enter any opening over 10
mm diameter
• will vortex 5 gallons of water at 1000 rpm
Square Blade Paddle
• welded to shaft
• stainless steel 316L
• weighs 180 grams
• for large volumes or high viscosities; axial
flow with maximum vortexing
• will vortex 5 gallons of water at 450 rpm
Pitched Blade Propeller
• set screws fasten propeller to shaft
• stainless steel 316L
• weighs 181 grams
• low shear, high top-to-bottom pumping
capacity with high gas injection
• will vortex 5 gallons of water at 3600 rpm
• propellers sold separately; can add multiple
propellers to one shaft 8mm (5/16") Ø
Baffle
• to fit a 4L beaker (custom sizes available)
• stainless steel 316L
• teflon bumper
Chuck Guard
• included with each stirrer
• clear chemical resistent polyurethane
• magnetic, hinged closure
Chuck
• 3 prong stainless steel.
• maximum opening 9.5 mm (3/8") diameter
• includes key
Caframo Part
Number
A140
A141
A150
A250
Compact version
of A150.
Blade diameter
is 38 mm (1.5")
A160
A161
(propeller only)
A162
(rod only)
A170
CG-1
13C-SET
Page 16