Velleman CCTVPROM17 Guide D'installation Rapide page 8

5. Enable push video.
6. Trigger the input alarm.
9. Mobile Surveillance via EagleEyes
EagleEyes is a powerful mobile surveillance program developed by AV TECH Corporation.
Note: For more operations details about EagleEyes, visit http://www.eagleeyescctv.com.
For any comment or question about this program, contact Velleman. Visit www.velleman.eu for contact details.
9.1 Prerequisite
Before installing EagleEyes on your mobile phone for remote surveillance, make sure you have checked the following:
 Your mobile platform is iPhone, iPad, BlackBerry, or Android.
 You have subscribed to mobile internet services on your phone; the service is available for use on your phone.
Note: You may be charged for internet access via wireless or 3G networks. For the internet access rates, contact your
local network operator or service provider.
 You have noted down the IP address, port number, user name, and password used to access your network camera via
internet.
9.2 Downloading EagleEyes
1. Connect to www.eagleeyescctv.com from your mobile device.
Note: Do not download EagleEyes from your computer.
2. Select Products > Software > Mobile app to access the EagleEyes introduction page.
3. Select your platform (iOS, BlackBerry, or Android) and download the program you need.
Note: This DVR is compatible only with iPhone, iPad, BlackBerry, and Android mobile devices.
4. Follow the on-screen instructions for downloading.
When the download is completed, EagleEyes is installed automatically on your mobile device.
Note: For more information about the configuration of this program, read the related instructions on the download page.
10. Push Video Configuration on Your Mobile Device
10.1 Prerequisite
Before setting up push video, make sure you have checked the following:
 You have an iPhone, iPad, or Android mobile device with EagleEyes installed. For more details, see Mobile Surveillance
via EagleEyes.
 An external alarm device is connected to the push video alarm-in on the rear panel. To record alarm occurrences, make
sure you also have a camera connected to CH1. Refer to Push Video Configuration for details on video channels and
alarm pins.
 The event record function of your DVR is enabled.
 The motion detection function of your DVR is enabled.
 Your DVR is connected to internet. For details, refer to http://www.surveillance-download.com/user/CMS.pdf.
V. 03 – 05/05/2014
CCTVPROM17
7. Receive an event notification and see video.
8 ©Velleman nv